The Holybro Kakute F7 flight controller makes it easy to build your multirotor. It integrates flight
controller (FC) and on-screen display (OSD) in one. The Kakute F7ÔÇÖs layout makes it easy to wire up the other components of the multirotor while keeping the build neat and tidy.
IMU upgraded to MPU6000,Re-designed and more reliable damping structure.
ÔÇó Current Sensor: Approximately 130 amps maximum measurable value
ÔÇó USB VCP Driver (all UARTs usable simultaneously; USB does not take up a UART)
ÔÇó 6 hardware UARTS (UART1,2,3,4,6,7)
ÔÇó All UARTS support hardware inversion. SBUS, SmartPort, and other inverted protocols work on
any UART without ÔÇ£uninvert hackÔÇØ.
ÔÇó Supports serial receivers (SBUS, iBus, Spektrum, Crossfire) only. PPM and PWM receivers are not
supported.
ÔÇó TF card for Blackbox logging
ÔÇó Dimensions: 35x41x7mm (includes foam-mounted gyro board in height)
ÔÇó Mounting Holes: Standard 30.5mm square to center of holes
ÔÇó Weight: 8g
Features:
ÔÇó Supports Betaflight, Butterflight, and Cleanflight.
ÔÇó Betaflight OSD. Change PIDs, adjust common configuration parameters, and change video
transmitter channel and power level, all using your transmitter sticks and goggles.
ÔÇó Soft-mounting built in. The IMU (ÔÇ£gyroÔÇØ) chip on this board is mounted on vibration-isolating
foam. This means that there is no need to soft-mount the board itself.
ÔÇó High-performance / low-noise / high sensitivity IMU. MPU6000 with 6-axis gyro and
accelerometer.
ÔÇó Ready for autonomous flight: Integrated BMP280 barometer and SCL/SDA pads for use with
external GPS/magnetometer units.
ÔÇó Dedicated bootloader button for easy firmware flashing.
ÔÇó Low-profile design fits into even very compact frames.
ÔÇó Input voltage 7v to 42v. Power the board directly from the flight pack, up to 6S (on ÔÇ£B+ÔÇØ pad
only).
ÔÇó Automatic voltage monitoring. No need to run a separate vBat wire for voltage monitoring; the
Kakute F7 monitors voltage directly from the power supply.
ÔÇó Filtered voltage output for clean, noise-free video. On-board regulators output 5v at up to 2
amps and 3.3v at up to 200 mA to power peripherals such as receiver, video transmitter, FPV
camera, or LED strip.
ÔÇó Supports BLHeli pass-through for easy ESC upgrade and configuration ÔÇè ÔÇèThe latest tekko32 45A 4in1 ESC has got some improvements on its performance´â•Ãœ 1) Enhanced BEC, withstand voltage up to 80V. 2)The first BLHeli32 ESC in the market with default PWM output 96K giving you smoother and quieter experience. 3) Current meter rate´â•Ã®185´¢×195.
There are no reviews yet.