Note:
In the charge mode,the charger will turn off if the voltage low to 3.3V.
In the discharge mode,it will turn off if the voltage low to 3.9V.
When you charge the mobile phone,the voltage low to 3.3V,it will turn off automatically.
Charge parameter:
Input voltage: 11.4-25.2V(3-6S)
Output current: 5V@3A,[email protected],12V@2A
Support protocol:Â QC2.0/QC3.0, DCP/A.pple/S.amsung/
               BC1.2/MTK PE1.1/PE2.0 FCP/SCP/SFCP
Discharge parameter:
Number of battery: 1-6S
Discharge current: 50MA
Battery interface: XT60,XT30,PH2.0
Battery type: Lipo
Indicator status: LED
Size:51*30*18mm
Charge Method:
1.Toggle the switch to charge the USBOUT.
2.Select the battery input voltage, press “KEY”, switch the corresponding LED Light.
3.With Red LED Display
4.USB Output,for m.obile phone devices.
Discharge Method:
1.First,determine the battery type and cells, toggle the switch to discharge,and press the “KEY” button to adjust the voltage cells,corresponding to the LED light.
2.Connect the battery to XT30, XT60 or PH2.0 port.
3.The LED light is on, indicating that the discharger is still in the discharge state. When the LED light is off,the discharge is finished.
Packaging Included:
1X URUAV DC-6SÂ Charger
There are no reviews yet.