Upgrade 30.5×30.5mm HIFIONRC F722 Pro V2 F7 OSD Bluetooth Flight Controller w/ 5V 10V BEC & 45A BL_32 3-6S 4in1 ESC Stack for DJI Air Unit / Caddx RC Drone

Size Conversion

Inches

Centimeters

Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.

Notice: Upgrade F7 Flight Controller to V2 new Version.

Will send new version. 

July 28th, 2020

Diffirence:

1. Ã”ÇèIMU: MPU6000 only. 

2. Also has DJI HD OSD. ( Only betaflight osd old version)

3. 10V 2.5A BEC Output ( 9V 3A old version)

4. 40x40mm External Dimension (30.5×30.5mm old version)

5. Designed the LED installation position in the four corners

6. has wireless Bluetooth parameter modulation

7. Type-C connection port

8. More clean and beautiful borad design & Reduce interference

Click here buy separate replace flight controller.

Click here buy separate replace 45A ESC.

Specification:
ÔÇèBrand Name: HIFIONRC
ÔÇèItem Name:  F722Pro V2 F7 Flight Controller & 40A BL_32 ESC Stack
ÔÇèF722Pro V2 F7 OSD Flight Controller

ÔÇèMCU:  STM32F722RGT6 216MHz

ÔÇèIMU: MPU6000

ÔÇèOSD: Betaflight SPI OSD &  DJI HD OSD (UART6)

ÔÇèUART: UART 1/2/3/4/5/6 

ÔÇèBEC Output: 5V 3A & 10V 2.5A ( supports stable power supply for DJI HD and high-power analog graph transmission)

ÔÇèInput Voltage: 3-6S Lipo

ÔÇèBlackbox: 16MB

ÔÇèFirmware: HIFIONRC F7

ÔÇèLED: 4 Ways independent LED Pad, support WS2812 Programable LED

ÔÇèDimension: 40x40mm

ÔÇèMounting Hole: 30.5×30.5mm, M4

ÔÇèWeight: 7g

ÔÇè- Onboard Voltage Sensor

ÔÇè- Support SBUS, CRSF, IBUS, Spektrum 1024/2048, XBUS, SumD & SumH Receiver, Built-in inverter

ÔÇè- Support Support 3.3V Satellite Receiver 

ÔÇè45A BLheli_32 32bits 4In1 ESC

ÔÇèInput Voltage: 3-6S Lipo

ÔÇèCon. Current: 45A

ÔÇèBurst Current: 55A (5S)

ÔÇèMOS Model:  QN3019M6

MCU: STM32F051, 48MHz

ÔÇèFirmware: BLheli_32

ÔÇè-Onboard Current Sensor

ÔÇè- Support DShot300-1200, Proshot1000, Oneshot, Multishot, PWM ( 48MHz)

ÔÇèÔÇèMounting Hole: 30.5×30.5mm, M4 

ÔÇèWeight: 12g 

Features:

– has wireless Bluetooth parameter modulation, and the UART used for bluetooth parameter modulation is UART4_MSP´╝î

  The Bluetooth signal is isolated and does not interfere with the receiver and the rest of the equipment

 (If we don’t find the bluetooth antenna, don’t worry, we hid it)

– This FC includes a DJI HD cable in default.

   If you use DJI HD, this means you don’t need to buy a separate FC and DJI HD cable.

   Don’t worry if you’re using a traditional Video TX. 

– The flight controller comes with an AT7456 chip, allowing you to still use OSD functionality.

– The STM32F722 MCU has a built-in inverter, so the receiver can be installed in any RX.

   Used when opening the corresponding UART serial digital receiver (default is RX2_UART2).

ÔÇè

ÔÇèPackage Included:

ÔÇè1x F7 V2 Flight Controller

ÔÇè1x 45A BL_32 4in1 ESC

1x Capacitor

ÔÇè1x Connection Cable

2x Power Cable

ÔÇè1x bag of Screws