GEPRC Crocodile GEP-CB4 4 Inch 174mm Wheelbase Frame Kit compatible DJI FPV Air Unit for RC FPV Racing Drone 20x20mm*26.526.5mm

Deascription:

GEP-CB4 Frame is specially designed for Micro Long Range Flight, Maximum support 4 inch propeller.GEP-CB4 Frame is perfectly designed by GEPRC TEAM.Adopting the newly upgraded design of aerodynamics principle.The Light-weight design,The solid and durable structure,The full 3K carbon plates combine with delicate 3D print parts. Battery mounted above the drone,It can be stably and reliably flying and the Center of gravity extreme balanced,The sense of ÔÇ£Easy To Control ÔÇ£are literally breath-taking.With the New producing GEPRC 6S 3000mAh battery,It can easily achieve 28 minutes flight time and bring an incredible and wonderful experience.The flight time and clarity are incredible!

Specification:

Brand: GEPRC

Item Name: GEP-CB4

Wheelbase: 174mm

Camera Position Size: 20mm

Props Size: 4 Inch

Thickness of Arms Plate: 2.5mm

Thickness of Bottom Plate: 2mm

Thickness of Top Plate: 1.5mm

Flight Controller Hole Distance: 20x20mm & 26.5×26.5mm

The Hole Position of Motor: 9mm

Weight: 45g

Recommended Parts:

Flight Controller:F4/F7

Motors:1206/1404

ESC:15A-30A

Features:

1. Full 3K carbon plates,The solid and durable structure.

2. Specially designed for Micro Long Range Flight,The frame tilts forward,The wide batteryÔÇÖs position.

3. The Mount of camera using 3D printing structure,It can absorbing most of vibration and Reducing Jelly.

4. Support Various installation way of flight controlÔÇÖs hole spacing.

5. The Edge of the motor base is Specially Designed to protect the motor in case of crash.

6. The GPS installation position is reserved inside frame,The rational layout bring perfect dimension deduct space aesthetics.

Package Included:

1 x 2.0mm Bottom Plate

1 x 1.5mm Top Plate

2 x 2.5mm Front Plate

2 x 2.5mm Back Plate

1 x 2.0mm Front Splint

1 x 2.0mm Back Splint

4 x´╝êM2*25) Aluminum Posts

2 x´╝êM2*20.5) Aluminum Posts

6 x´╝êM2*6) Round Head Screws

14 x´╝êM2*8) Round Head Screws

4 x´╝êM2*10) Round Head Screws

4 x´╝êM2*4) Round Head Screws

8 x´╝êM2) Push Block Nuts

8 x´╝êM2*2) Plastic Nuts

8 x´╝êM2*18) Plastic Screws

1 x 3D Print Crush Barrier of Camera

1 x Fixing Part of Antenna Red

1 x Fixing Part of TBS Antenna Red

2 x Batteries Pad

8 x Landing Shock Absorption Pad

2 x Protective Tube of Antenna

4 x Rubber Shock Pad

2 x (M15*180mm) Batteries Strap

2 x (M15*180mm) Batteries Strap

1 x (1.5mm) L Shape Wrench

1 x Plastic Matching Plate