-10%
RC Airplane Parts
3 in 1 2-6S RC Lipo Battery Voltage Meter Monitor Tester Signal Loss Alarm & Loss Aircraft Finder & Low Voltage Buzzer DIY for RC Models
- SKU : 1668855
- Condition : New
- Brand : BAXIN
- Processing Time : Ships Within 24-48 Hours
- Return Policy : 30-day refund or replacement
$17.99 $19.99
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
3 in 1 2-6S RC Lipo Battery Voltage Meter Monitor Tester
ÔÇèSignal Loss Alarm & Loss Aircraft Finder & Low Voltage Buzzer
ÔÇèDIY for RC Models
ÔÇèSignal Loss Alarm & Loss Aircraft Finder & Low Voltage Buzzer
ÔÇèDIY for RC Models
Description
This is a 3in1 LiPo Battery monitor, Discovery buzzer & Signal loss alarm functions.
Built-in ultrahigh brightness LED & twin loud buzzers.
Item Name: Signal Loss Alarm Loss Aircraft Finder
Working voltage: 5.2-26V DC, 2-6Cells LiPo
Standby current less than 10mA
Working current, Max 120mA (blinking & beeping)
Voltage threshold setting: 3.4-3.7V/cell (Red LED)
Twin loud buzzers, 85db each
Ultrahigh Brightness LED, 20lm, 0.2w, Blue
Features
Suit for fixed-wing copters, helicopters, multicopters, RC cars, etc
With Battery monitor function
Long press 3 seconds to enter the voltage threshold setting;
short press to select voltage threshold value between 3.4-3.7V (red led indicate);
10 seconds with no operation, will auto save the current setting.
If the total voltage is below the ‘holding value X cell’, the alarm will continue to beep and flash blue until the voltage reaches or exceeds the set value.
With Discovery buzzer function
Only plug the Y cable wire to Aux channel of receiver to enable the function;
Available signal of receiver is a must , the alarm is started by manual;
With Signal loss alarm function
Firstly turn on the transmitter, and plug the alarm to reciever throttle channel with Y cable wire, then turn on the receiver.
This function is auto start. When the receiver is power on, the alarm will auto start in following situations :
Turn off the transmitter,and do not turn on it in 1 minute, so that the reciever receive no signal.
Transmitter is on, but no joystick action has been detected in 1 minute, or unchanged signal.
It continue to beep in ‘bibi…bibi…bibi‘, and flash blue
Package Included
1 x 3 in 1 Signal Loss Alarm Loss Aircraft Finder
1 x Y cable wire
There are no reviews yet.