30.5×30.5mm MAMBA F405 MK3 F4 Flight Controller 40A BLHeli_S 3-6S CH40 8Bit DSHOT600 Brushless ESC for RC Drone FPV Racing

Item Name:  MAMBAF405 MK3 Flight Controller 40A MK2 6S 8Bit ESC Stack

MCU: 168MHz STM32F405RGT6

GYRO: MPU6000

Barometer: Yes

OSD: Yes

Blacbox: 16M Flash Memory

Uarts: 6Set

ESC Soft: Dshot300/600 

ESC Telemetry: Yes

Power Led: Yes

LED Controller: BF LED/MB LED（4 Set 2812 LED）

S. F.Port: Yes

RSSI: Yes

Buzz: Yes

Input: 3~6S Lipo (12.6~25.2V)

TVS Protection: Yes 

BEC:3.3V 0.5A&  5V 3A (System Power)&       

5V 3A(LED)& 9V 3A 

MOUNTING: 30.5mm,M3

INPUT VOLTAGE: 3~6S Lipo (12.6V~25.2V)

CONTINUE CURRENT: 40A×4

BURST CURRENT: 50A (10S)

BEC: No

Target: BLHeli_S CH40

SOFT: Dshot300/600

TVS Protection: Yes 

MOUNTING: 30.5mm/M3

Fixed

1. Add I2C function

2. When you connect the USB, the receiver and OSD settings can be saved

3. Increase the pad area

4. LED signal selection （when Mamba Led sys avaiable）

5. BEC short circuit protection

6. TVS instant high voltage protection 30V

Update

1. F405 models support F.prot（Most）

2. Upgrade the anti-interference cable

3. Use Typec（Most）

4. The pad area of Mini flight controller (20×20) increased by 140%

Added

1. Add self-recovery insurance to the receiver’s 5V power supply

2. Increase the camera VCC power supply pad

3. Standard flight controller (30.5×30.5) adds spare pad

4. Gyro uses an independent Low Dropout Regulator (Low Dropout Regulator) and reduces ripple interference

1 x MAMBA STACK F405 MK3 40A 6S 8BIT Stack                                                                             

1 x High Frequency 470uF/35V 

2 x 8pin sh1.0 

2 x 12AWG 100mm 

AMASS Original XT60