30.5×30.5mm Mamba F722 APP F7 OSD Bluetooth Flight Controller w/ 5V 9V BEC & F60PRO 60A BL_32 3-6S DShot1200 4in1 ESC Stack for DJI Air Unit RC Drone FPV Racing

Update Details:

BT to WiFi
USB power supply can use receiver, OSD
Add a group of I2C pads (SCL SDA)
Add inverter Dual-Way TX serial port
Add 2812 LED switch function, key can turn off led
Add 4 corner LED interface to support BF led and Mamba led
Upgrade to stronger type-C, optimize pad position

November 7th, 2020.

Specification: 
Brand Name: Mamba
Model: Mamba F722 APP F60PRO 
Item Name: 30.5×30.5mm F7 Flight Controller & 60A 4in1 ESC Stack

F7 Flight Controller 

FIRMWARE TARGET /CONFIG´╝Ü MAMBA F722 I2C 

MCU: 216MHz STM32F722RET6 32BIT
IMU: MPU6000
Barometer: No
OSD: BF OSD
Blacbox: 16M Flash Memory
Uarts: 6Set
ESC Soft: Dshot300/600/1200
ESC Telemetry: RX6
LED indicator: Blue&Orange for FC Status,Green 9V,White 5V,Red 3.3V

LED Controller:BF LED/MB LED´╝ê 4 Set 2812 LED´╝ë
WIFI: SpeedyBee APP 
Smartaudio: Yes
Buzz: Yes
Input: 3~6S Lipo (12.6~25V)
TVS Protection: Yes 
BEC: 5V 2.5A & 9V 2A (Max 3A)
MOUNTING: 30.5mm/M3 WEIGHT: 9g
Supply : 
8pin sh1.0 *1

Smartaudio: Yes
Buzz: Yes

Input: 3~6S Lipo (12.6~25V)
VTS Protection: Yes

F60PRO 60A BLHeli_32 3-6S 4in1 ESC
Con. Current: 60A
Burst Current: 75A ( 5 Seconds)
Input Voltage: 3-6S ( 12.6-25V)
Firmware: MAMBA F60 PRO
Support DShot300/600/1200
BEC Output: NO

Supply: High Frequency 470uF/35V    
Mounting Hole: 30.5×30.5mm ( M3)

Weight: 22g

Package Included:
1x F7 Flight Controller
1x 60A 4in1 ESC
1x bag of Screws
1x Cable