Beitian BN-220T GPS GLONASS Module for APM Pixhawk CC3D Naze32 F3 F4 Flight Controller RC Drone
Specification:
Electrical Characteristics | Chipset | M8030-KT |
Frequency | GPS L1, GLONASS L1, BEIDOU B1, GALILEO E1, SBAS L1, QZSS L1 | |
Receiving Format | GPS, GLONASS, BEIDOU, GALILEO, SBAS, QZSS. Default GPS, GLONASS, SBAS, QZSS. |
|
Channels | 72 Searching Channel | |
Sensitivity | Tracking | -167dBm |
Reacquisition | -160dBm | |
Cold Start | -148dBm | |
Hot Start | -156dBm | |
Accuracy | Position Horizontal | 2.0 m CEP 2D RMS SBAS Enable (Typical Open Sky) |
Velociti | 0.1m/sec 95% (SA off) | |
Timing | 1us synchronized to GPS time | |
Acquisition Time | Cold Start | 26s |
Warm Start | 25s | |
Hot Start | 1s | |
Data Output | Support Rate | 4800bps to 921600bps, Default 9600bps |
Data Level | TTL Level | |
Data Protocol | NMEA-0183 or UBX, Default NMEA-0183 | |
NMEA Message | RMC, VTG, GGA, GSA, GSV, GLL | |
Update Rate | 1Hz-10Hz, Default 1Hz | |
FLASH | 4M FLASH, Store the configuration permanently | |
Operational Limits | Altitude | 50,000m Max |
Velociti | 515m/s Max | |
Acceleration | Less than 4g | |
Power Consumption | VCC | DC Voltage 3.0V-5.5V, Typical: 5.0V |
Current | Capture [email protected] | |
Mechanical Specifications | Dimension | 22mm*20mm*8mm |
Weight | 8.3g | |
Connector | 1.00mm 4pins connector | |
Environment | Operating Temp | -40 ┬░C ~ +85┬░C |
Storage Temp | -40┬░C ~ +105┬░C | |
LED | Built-in LED | TX LED: blue. The data output, TX LED flashing |
PPS LED: red. PPS LED not bright when GPS not fixed, flashing when fixed |
Package Included:
1 x BN-220T GPS GLONASS Module
1 x BN-220T GPS GLONASS Module
There are no reviews yet.