Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
null
Description:
This RC receiver unit is FLYSKY AFHDS compatible. It offers full 7-channel support in ultra-light weight and mini size. It is suitable for 1/87 RC conversion.
Features:
1. FLYSKY 2.4GHz AFHDS compatible
2. 7 channel support
3. Integrated two standalone Bi-directional ESC (max 1A currency)
4. Integrated one Single-directional ESC (max 3A currency)
4. Mini size (16.0 x 10.0 x 2.5mm)
5. Operating Voltage 3.0V ÔÇô 4.2V
6. Product Weight: 0.5g
Output Usage:
Servo signal output:
CH1: (Steering)
CH2: (Throttle)
CH3: (Spare, normally use to control the sound unit or light unit)
CH4: (Spare, normally use to control the sound unit or light unit)
CH7: (Spare)
Bi-directional ESC output:
OUT1/OUT2: connect a brushed motor, controlled by CH2 signal from transmitter
OUT3/OUT4: connect a brushed motor, controlled by CH6 signal from transmitter
Single-directional ESC or LED output:
OUT5: connect a brushed motor or LEDs, controlled by CH5 signal from transmitter
Compatible Transmitters:
FLYSKY transmitter like GT2/GT2B/GT3/GT3B/GT3C/GT3C with PSX.0.6.1 8CH
FLYSKY Stick-type transmitter like CT6A/CT6B/T6/TH9X/I4/I4X/I6/I6X/I10
Jumper Stick-type transmitter like T8SG/T12/T12PRO/T16/T16PRO
Any OPENTX and Deviation Stick-type transmitter installed with A7015 RF module
Package Included:
1 x Receiver
Bind:
Power on the receiver, LED will flash slowly. Wait 15 seconds and the LED will flash quickly, this means the receiver is in paring mode. Now you could operate your transmitter to start the bind operation. Once the bind is successful, the LED on receiver will be on. Power off both your transmitter and receiver then power them on again, now the receiver should be controlled by your transmitter.
There are no reviews yet.