Double RC Engine Sound Simulated System Module Speaker Support 2S-4S Lipo With 4CH AX6S Remote Control for RC Crawler Car Truck Boat

Description:

Feature: Dual channel output

Adopt SGS (Sound Particle Synthesis Technology), SFC (Intelligent State Follow Compensation Technology), the sound is more realistic

Support AUX channel, can simulate a variety of auxiliary sounds. Can simulate all kinds of alarm horns

The device supports up to 4S Lipo

Support up to 10 built-in engine sounds and 5 built-in alarm sounds, which can be switched freely between different engines

Support intelligent Chinese and English voice prompt function, making operation easy and free

Support parking bleed valve sound; brake sound can be set to open and close freely

Support the positive and negative settings of the throttle direction

Support standby mode, enter standby when you do not operate the remote control within 60 seconds, and lightly flip the throttle to start.

Support low voltage protection, automatic detection of battery type when power on.

Weight: 163G

Packing: color box 100*55*70MM; product size 46*82*46MM

Product without battery

Transmitter:

1. Using a digital control system, the distance is longer and the signal is more stable;

2. The handle is wrapped in soft rubber, which makes the hand feel more comfortable and can relieve hand fatigue;

3. Oblique steering wheel, more user-friendly operation;

4. The throttle has increased the EPA knob, the end of the throttle is set, that is, the speed limit setting, which is especially suitable for beginners to get started. The throttle speed limit can be set to 0-100%;

5. Steering ratio: also called large and small rudder. It sets the angle of the steering gear. If the car rotates too fast, please reduce the steering range, if the car rotates too slowly, please increase the steering range;

2. Description of the enhanced remote control:

1. Waterproof receiver: The circuit board of the waterproof receiver has been precision waterproofed. If you play a car in a place with water, or the remote control boat enters water, you don’t have to worry about the receiver burning; but a point, the receiver can not work in deep water, because any receiver is below 20 cm underwater, the signal can not be transmitted;

2. The third channel switch: The remote control has a third channel and a fourth channel. The function is to switch modes. For example, the steering gear will swing to the left when it is switched, and then it will swing to the right. The switching mode does not include

Power off mode, so this requires the third channel switch. The function of the third channel switch has three modes, left switching, right switching, and power off. If it is a model light, the mode is light on-constant light-flashing light

-Turn off the lights. If you want to use this remote control to modify the nesting boat, you need the third channel switch when manipulating the tipping bucket.

3. Remote control lithium battery: The original standard remote control is 4 1.5V dry batteries. Throw away when the power is exhausted. Some dry batteries can be charged. If you want longer remote control life, you must add this remote control. Lithium battery of the device, charge once, normal use for half a month, but it also depends on how long you use it at a time;

Weight of single box of remote control: 0.5KG

Remote control distance 150 meters

Package Included:

1x sound system

1x transmitter