– The FRM302 is FlyskyÔÇÖs newest generations of 2.4GHz RF module for UAV, aerial photography and competition. With more power than ever, the FRM302 has a range of up to 50km.
– High gain RF components, coupled with the 2.4GHz AFHDS3 protocol, enables the module to cut through interference easily while maintaining high transmission rates, especially when compared to 900MHz counterparts.
– FRM302 uses FlyskyÔÇÖs latest generations of intelligent wireless protocol, AFHDS3, which has a built-in chip with higher sensitivity and a higher gain.
– The FRM302 achieves high-speed data transmission (2.4GHz), low latency (<10ms, UART), precise response even with weak signal strength and active evasion of co-channel interference in long distance and multi-obstacle use cases.
ÔÇèBinding:
UART: If using UART binding must be done using the transmitters bind function.
PPM: If using PPM the modules bind button can be used to initiate the binding process.
-The status indicator will flash green quickly when the module is in bind mode.
– When the status indicator turns solid green the module has bound successfully.
– If the status indicator is slowly flashing blue it means the module is not bound.
– Before binding make sure that the FRM302 module is installed correctly.
– In two-way mode, the RF module only remembers the last receiver bound. If more receivers are required put the
transmitter into single direction mode.
ÔÇè ÔÇèCompatibility:
The FRM302 module is compatible with the PL18/NV14/FS-TH9X along with various other Radios when using PPM output.
The FRM302 module is compatible with all AFHDS 3 receivers such as the FTr10/FTr16S/FTr4/FGr4/FGr4P/FGr4S/GMR/FTr8B/FGr8B.
WHATÔÇÖS MORE:
The FTr16s FPV receiver, the FTr10 and all other AFHDS3 receivers are compatible.
Support PPM and serial communication with failsafe also available in PPM mode.
Real-time chip temperature control ensures the system remains safe, reliable as well as prolonging the life of the hardware.
Change FRM302 settings with the touch of a button.
Supports wide range of input voltages (5-28V) and different battery connectors.
Customizable and replaceable antenna.
RGB LED indicator ring around button (Blue, Yellow, Green, Red)
Regular online updates: the new Flysky Remote Control Assistant, is a one stop shop for managing, updating and feature unlocks for the FRM302.
Be the first to review “FlySky FRM302 2.4GHz AFHDS 3 Transmitter Module PPM/UART Data Port for PL18 FS-TH9X NV14 Compatible AFHDS 2A Transmitter” Cancel reply
There are no reviews yet.