Happymodel CrazybeeX DXS F4 1-2S AIO 5in1 Flight Controller Built-in VTX/ DSM2 DSMX Receiver/ESC/OSD

CrazybeeX series flight controller is the first 4in1 AIO flight controller which could handle 2s. 

The CrazybeeX DXS V1.0 is the newest member which is the first flight controller built-in DSM2/DSMX compatible SPI Receiver.

It’s a better upgrade for reduce the weight of your brushless whoop if you are using Spektrum transmitter.  Best upgrade flight controller for Mobula6/Mobula6HD DSMX version .

Flight controller	MCU:STM32F411CEU6 (100MHZ, 512K FLASH) Sensor: MPU-6000(SPI connection) Board size: 28.5 * 28.5MM Power supply: 1S-2S battery input (DC 2.9V-8.7V) Built-in 5A(each) Blheli_S 4in1 ESC Dshot600 ready Built-in Betaflight OSD(SPI Control) Built-in 5.8G VTX Built-in SPI Frsky receiver support D8/D16 Built-in 5V 1A BEC Built-in voltage detection Firmware version Customized Betaflight4.3.0 S411
Onboard 4in1 ESC	MCU upgraded to EFM8BB21 Power supply: 1-2S LiPo/LiPo HVCurrent: 5A continuous peak 6A (3 seconds) Support BLHeliSuite programmable Factory firmware: S_H_50_REV16_7.HEX Default protocol: DSHOT600
Onboard DSM2/DSMX SPI receiver	SPI BUS receiver DSM2/DSMX compatible Channels: Max 12ch Failsafe support No ground interference ( Transmitter and receiver 1 m from the ground): 200m~300m RSSI enable(show on the goggles)
Onboard 5.8g VTX	Output power: 25mw Frequency: 40CH Input voltage: 3.3V~5.5V Current consumption: 300mA(type) Frequency: 5.8GHz 5bands 40 channels With Race band Smartaudio ready Default vtx_power should set to be ÔÇ£3ÔÇØ
Onboard Voltage and Current detector	Voltage Meter scale ÔÇ£110ÔÇØ Amperage Mete scale ÔÇ£1175ÔÇØ

Notice: Recommend Betaflight configurator 10.7.0 version
SPI Receiver option: Spektrum

Bind procedure:

1. Plug the USB then press the bind button, the red LED at the bottom of the flight controller will blinking fast , this indicate the SPI DSM2/DSMX receiver is in bind mode.
2. Plug the USB then connect to Betaflight configurator, move to the CLI tab , then type ÔÇ£bind_rxÔÇØ, the red LED at the bottom of the flight controller will blinking fast too , this indicate the SPI DSM2/DSMX receiver is in bind mode.

Package Included:

1* CrazybeeX DXS AIO 5in1 F4