No products in the cart.
-15%
FPV Racing Drone
iFlight Alpha A75 HD 78mm SucceX-D 20A Whoop F4 3S CineWhoop FPV Racing Drone BNF w/ Caddx Nebula Nano HD Digital System & DJI FPV Goggles V2
- SKU : 29418
- Condition : New
- Brand : iFlight
- Return Policy : 30-day refund or replacement
$1,277.99 $1,503.99
Notice:
Because Caddx Nebula Pro camera is out of stock, this item will replace it to Caddx Nebula Nano Camera.
All back order will send with Caddx Nebula Nano. Will have little stock next week.
May 1st, 2021.
Specification:
Brand Name: iFlight
Model: A75 HD
Item Name: 78mm F4 3S Whoop FPV Racing Drone with Caddx Nebula HD Digital System
Body Size: 102.9×102.9mm
Weight: 66.9g (without battery)
|
SucceX-D 20A Whoop F4 AIO FC ESC |
Size: 30.5*30.5mm ( Mounting Hole: 25.5×25.5mm, M3) Connector: Micro-USB Input: 2-4S |
| XING-E 1103 8000KV Brushless Motor |
Height: 10.2mm Weight: about 3.8g(with 30AWG 32mm length) |
| HQProp 40mm & Gemfan 1635 4-Blade Propeller |
Item Name: HQProp 40mm & Gemfan 1635 4-Blade Propeller Quantity: 4 CW & 4 CCW ( HQProp 2 Pairs & Gemfan 2 Pairs) Color: Color May Vary |
| Caddx Nebula NaNo HD Digital System |
Model: Vista KIT
Weight: Vista KIT(camera included):24g/Antenna:2.5g
Dimensions:
Vista Kit: 30x29x13mm
Camera: 14x14x21mm
Operating Frequency: 5.725-5.850GHz
Transmitter Power(EIRP): FCC/SRRC/MIC: <30dBm, CE: <14dBm
Min. Latency (end-to-end):720p 60fps: 32ms
Max. Transmission Distance: FCC/SRRC: 4km, CE: 0.7km
I/O Interface: USB-C,IPEX,3-in-1 Port
Supported Flight Control System: F3,F4,F7
Operating Temperature Range: 32° to 104° F (0℃ ~40℃)
Input Power: 7.4-26.4V
Power output: 25mW/200mW/500mW/700mW
Goggles: work with DJI goggles
Camera:
Model: Nebula Nano
Image sensor: 1/3 inch CMOS sensor
Resolution: 720p/60fps
FPV/Recording FOV: 150°
Lens: 2.1mm
FPV Latency: 32ms
TV system: NTSC&PAL(switchable)
Work Temperature : -20℃~+60℃
Weight: 4.5g
Demension: 14*14*21mm(can be extended into 19*19mm)
|
| Receiver |
Built-in DJI Receiver, Compatible with DJI Remote Controller |
| DJI FPV Goggles V2 |
DJI FPV Goggles V2 Weight: Approx. 420 g (headband and antennas included) Dimensions: 202×126×110 mm (antennas included), 184×122×110 mm (antennas excluded) Screen Size: 2-inch × 2 Screen Resolution (Single Screen): 1440 × 810 Screen Renew Rate: 144 Hz Communication Frequency: 2.400 – 2.4835 GHz*; 5.725-5.850 GHz Transmitter Power (EIRP): 2.400 – 2.4835 GHz Live View Mode: Low-Latency Mode (810p 120fps); High-Quality Mode (810p 60fps) Video Format: MP4 (Video format: H.264) Supported Video Play Format: MP4, MOV, MKV (Video format: H.264; Audio format: AAC-LC, AAC-HE, AC-3, MP3) Operating Temperature: 32° to 104° F (0° to 40° C) FOV: Adjustable from 30° to 54°. Adjustable image size from 50%-100% Interpupillar Distance Range: 58 -70 mm Supported Storage Card: microSD cards with storage capacities of up to 256GB. DJI FPV Goggles Battery Capacity: 1800 mAh Voltage: 9 V (Max.) Type: LiPo 2S Charging Temperature: 0℃ to 45℃ Energy: 18 Wh Max Charging Power: 10 W Battery Life: Approx. 110 minutes (measured in an environment of 25°C at maximum brightness level) |
Features:
– 66.9 grams (without battery)
– Butter smooth XING 1103 8000KV，more torque and efficiency
– Ducts to protect the sensitive environment or yourself
– Pre-tuned with smooth cinematic settings
– iFlight Albatross 5.8G light antenna upgrade (included)
– iFlight Albatross 900mhz light micro antenna upgrade (included with every Crossfire Nano RX)
Recommend buy Additional Parts together:
3S 450mAh 70C Lipo XT30 Lipo Battery ( Link)
DJI Remote Controller ( Link)
Pacakge Included:
Prebuilt and tested
1x 78mm Frame
1x SucceX-D 20A Whoop F4 AIO FC ESC Board
4x iFlight XING-E 1103 Motor
1x Caddx Nebula Nano Digital HD System Kit
1x Albatross LHCP ipex 5.8g light Antenna
2x HQ 40mm 4-Blade Prop CW
2x HQ 40mm 4-Blade Prop CCW
2x Gemfan 40mm 1.6inch 1635 3-Blade Propeller CW
2x Gemfan 40mm 1.6inch 1635 3-Blade Propeller CCW
2x 10*130mm iFlight Lipo Strap
1x DJI FPV Goggles V2
1x DJI FPV Goggles Battery
There are no reviews yet.