iFlight ProTek35 HD 3.5 Inch 6S CineWhoop FPV Racing Drone w/ Nebula Nano Digital HD System + DJI Goggles V2

Description:

After our very popular 3inch Cinematic EVA bumper BumbleBee and Green CineWhoop series, we were trying to increase performance and reduce weight for an even better and longer flight experience for a wide variety of use. 

Our all new 3.5inch project is finally ready for all you content creators or those guys who like to wear some protection every now and then. Prop protection is what we’re talking about here… 

ProTek is not necessarily just a Cinewhoop series but far more. Equipped with our all new 2203.5 motors for more power and less heat. We were able to increase speed and thrust by 50% compared to it’s 3inch predecessor which gives a lot more room for a lot more fun. Our GPS measured maximum speed was above 120km/h and a maximum thrust of 750g per motor (3kg in total) would even carry heavier cams than a Gopro but also do some loaded punch outs or light freestyle moves. 

A lot of thought was put into the different assembly options. Our stock BNF will ship in the standard configuration but you can either do a pusher mod (flip the build upside down) or a lite mod (remove the protective plastic for weight optimization). 

Durable plastic protectors with copper standoffs, portable compact design, easy accessable UBS port without disassembly, LED battery status, lost model buzzer and a universal GoPro TPU for a full size or naked GoPro. If you wanna go extra light, get one of our 5V balance plug GoPro power cables to get rid of the internal battery.

Need a naked GoPro case or mount? Checkout our new iFlight naked GoPro Hero8 TPU case to use with your ProTek35. 

Features:

ProTek35 Prop Guards V2.0

No Props or frame in view!

High performance True-AIO Board Beast Whoop F7 AIO 45A v1.1 to save weight and space

T700 Quality Carbon (40% more tensile strength compared to common 3K carbon)

Lightweight one-piece frame design (Less flexibility, more Rigid, more Durable)

Low Resonance frame construction (Less Jello, more Cinematic footage)

Nebula Nano Digital HD System

Butter smooth 2203.5 3600KV (4S) (LNK) / 2205 2300KV (6S) (LINK)

re-tuned with smooth freestyle settings

Specification

Brand: iFlight

Item Name: ProTek35 BNF 

Board Beast Whoop F7 AIO 45A V1.1 

Motor: XING 2205 2300KV (6S) 

Wheelbase: 151mm

Body Size: 118*94.5mmmm

Bottom plate thickness: 3.5mm

Top plate thickness: 2mm

Top and bottom plate spacing: 20mm (aluminum standoff height) 

Propeller size: 3.5 inch

FC pattern: 25.5*25.5mm / 20*20mmmm

FPV cam spacing: 20mm

Weight: 348.3g (without battery)

FC // Beast F7 AIO 45A V1.1	MCU: BGA-STM32F745 Gyro: MPU6000 UARTs: 5 Blackbox: 16Mb Onboard Flash BEC output: 5V 2.5A  Barometer: DPS310 (Only Betaflight 4.3.0 and above) Connector: Micro-USB OSD: AT7456E FC Firmware：IFLIGHT_F745_AIO  Mounting pattern: 25.5*25.5mm φ3mm Dimensions: 32.5*32.5mm Weight: 8.5g
ESC // 45A 2-6S	Current Sensor: Yes Input: 2-6S LIPO Current scale: 200 Constant: 45A / Burst: 50A BLHeli: BLHeli-S RPM-Filter ready: Yes (JazzMaverick or JESC firmware) Telemetry: no ESC Firmware: BlheliS G-H-30 Mounting pattern: 25.5*25.5mm/Φ3mm Dimensions: 32.5*32.5mm

Package Included:

1 x ProTek35 Frame

1 x DJI Goggles V2

1 x Nebula Nano Digital HD System Kit 

2 x Albatross LHCP RP-SMA 5.8g antenna

1 x TPU Bracket for Nebula Nano Air Unit

1 x TPU Antenna holder

2 x Nazgul 3535 propeller (Set of 4 – Color May Vary)

1 x iFlight Lipo Strap 15*150mm (Color May Vary)

1 x  iFlight Lipo Strap 15*250mm (Color May Vary)

1 x TPU bottom stand black for GoPro ( Protector not included)

PRE-TUNED & PRE-SETUP:

Don’t worry about tuning, we did that for you already! A basic PID- and Filter tuning was applied for a great flight experience!

To restore lost tunes or updates, please check our linked article on ‘Firmware/Factory Dumps’

Angle-Mode (self balancing level mode) is enabled by default to make sure your first flight doesn’t end in a mess!

Please check our linked article on ‘How to disable Angle-Mode, activate Acro-Mode’