Qiotek Zealot F427 PIXHAWK Autopilot Ardupilot Firmware Flight Controller for VTOL Drone Airplane Multirotor

The QioTek Zealot F427 is an internally vibration dampened autopilot with a protective CNC metal case for ruggedness. It features fully redundant sensors, expanded number of outputs, temperature controlled IMUs, and is the first high performance autopilot with integrated OSD chip.

Specifications:

Processor:

MCU – STM32F427VIT6

16KB FRAM – FM25V01

Sensors

Gyro/Accelerometers: ICM20689, ICM20602, and ICM20649

Barometers: MS5611 and DPS3018

Compass: QMC5883L

Power

5-5.5VDC from USB (internal circuitry and RX only) or via 2 x PowerModule connectors, or via internal BEC off VBAT input pin. All 5V pins are powered when USB, or Power Module(s), or VBAT input is used.

Internal 5V, 1.5A BEC directly can be used with up to 6S LIPO batteries to supply board and peripheral power up to 1.5A max with voltage only monitoring via BATT2 monitor (500ma max recommended).

ADC monitoring of board voltage

ADC monitoring of Servo/Output’s power rail

Interfaces/Connectivity

-14 PWM Outputs with independent power rail for external power source

-4 Relay outputs

-MicroSD card reader

-Micro USB or remote USB via a JST_GH connector

-Builtin RGB LED

-External Buzzer interface

-2, 6.6V tolerant ADC inputs for RSSI, Analog Airspeed, etc.

-5 UARTs

-Safety Switch connector

Dimensions

Weight 65g

Size: 42mm x 65mm x 25mm

Click for diagram.

Recommend Part: (Not Included)

Radiolink Mini M8N GPS Module UBX-M8030 with GH plug

Package Included:

1*Qiotek Zealot F427 PIXHAWK Flight Controller

1*Wifi Module

1*14S PM Module

1*Saftkey Buzzer

1*12C&CAN Splitter

2* 4P Uart/OSD Cable

2* 6P Uart/AUX Cable

1* BAT/BEC Cable

1* SD Card

1* 3M Tape

1* Type-C Cable