RW.RC 80A Brushless ESC 5V5A BEC 2S-6S for RC Models Fixed Wing Quadcopter Multirotor
Specification
Model : RW-80a
Continue Current : 80A
Burst Current : 95A
BEC Type : switch
BEC Output : 5V5A
Power Input : 2-6S LiPo/5-18 nimh
Weight : 76g
Size : 85*38*15mm
Important Note:
these ESCs are all Opto, without BEC to your Receiver, you need extra power source for your receiver. You can use a UBEC, a voltage regulator, or extra batteries as the power source for your receiver. If you hear the music tone repeat again and again for more than 3 times, you may need to check your power source to the receiver.
Phrases 1 Enter programming Mode
1. Connect your motor and receiver to the speed controller, but do not connect the battery yet.
2. Turn on your transmitter and move the throttle stick to the full throttle position (full up). Please Note: Most for Futaba transmitters have the throttle channel reversed by default.
3. Connect your battery and the controller will initialize with a musical tone.
Phrases 2 Programming
After 3 seconds, the controller will start beeping a for SEQUENCE of tones – a musical tone followed by one or more beeps. Each for SEQUENCE represents a parameter that you can program and is repeated 3 times. The parameters are:
![](https://i0.wp.com/imgmgr.banggood.com/images/oaupload/banggood/images/2A/2F/3f8d05f9-bed9-40c4-bf9f-81b616ab2de5.png?w=1170&ssl=1)
Package Included
1 x RW.RC 80A Brushless ESC 5V5A BEC 2S-6S for RC Models Fixed Wing Quadcopter Miltirotor
There are no reviews yet.