-15%

SKYSTARS STX225 DIY Version 225mm RC FPV Racing Drone PNP w/ F405 AIO RGB LED 1200TVL 600mW VTX


  • SKU : 1437279
  • Condition : New
  • Brand : SKYStar
  • Processing Time : Ships Within 24-48 Hours
  • Return Policy : 30-day refund or replacement

$242.99 $286.99

Compare

Specification: 
Brand name: SKYSTARS 
Item name: STX225 DIY version FPV racing drone PNP
Recommended 3 – 4S 1300 – 1500mAh battery (package not included)


Frame kit

ÔùÅ Wheel base: 225mm

ÔùÅ Frame arm thickness: 4mm

ÔùÅ Bottom plate thickness: 2mm

ÔùÅ Side plate thickness: 2mm

ÔùÅFrame kit material: 3K carbon fiber 

2205 2300KV Brushless Motor Motor KV: 2300RPM/V 
Idle current (Io/10V): 1.26A
Lipo cell: 3-5S
Weight: 26g
Max continuous current: 25A
Max continuous power: 240W
Max thrust: 700g (4S/5′)
Configu-ration: 12N/14P
Motor resistance (RM): 0.0572 ╬® 
Stator diameter: 22mm
Stator thickness: 4mm
Motor diameter: 27.55mm
Motor body length: 20mm
Overall shaft length: 34.2mm
Prop adapter shaft: M5
Bolt holes spacing: 16mm
Bolt thread: M3
Propeller: 5inch
35A BLHeli_32  RGB LED ESC Continuous current: 35A
Peak Current: 40A(10S)
Input voltage: 2-5S
BEC: NO bec
Main control chip: STM32F051
Firmware: BLHeli_32 supports 500HZ PWM, Oneshot125, Oneshot42, Multishot, Dshot150/300/600/1200.
 F405AIO Updated. Click For Details

ÔùÅ Inculd barometer.

ÔùÅ Sensor: MPU6000

ÔùÅ Power supply: 5V

ÔùÅ Integrated OSD

5x UARTs
1x Group of  G/S1/S2/S3/S4 pads for 4in1 ESC Signal/GND
4x pairs of corner pads for ESC Signal/GND connections (DSHOT compatible)
1x pair I2C1 pads
1x press button for BOOT(DFU) mode
1200TVL CMOS Camera Case size: 19mm*19mm
Weight: 9.5g
Total pixels: PAL: 1020H×596V (0.61MP); NTSC: 1020H×508V (0.52MP)
Effective pixels: PAL: 976H×582V (0.57MP); NTSC: 976H×494V (0.48MP)
Signal system: PAL/NTSC switchable
Resolution ratio(horizontal center): 1200TVL
Video output: 1.0Vp-p/75╬®
Automatic gain control: yes
White balance: on/off optional 
Exposure mode: electron exposure
Electronic shutter: 1/50(1/60) – 1/100000 S
Gamma correction: 0.45/1.0
Synchronization method: inter-sync
Camera lens: standard 2.3mm
Lens operating voltage: DC12V (wide voltage, measured can work normally at 7.5-13V)
Working current: 70mA (low power consumption)
Working temperature: -20Ôäâ~-60Ôäâ
Humidity: 0%~98% 
   600mw switchable VTX                   

Frequency band: A – E ( 8 channels in each band )

Transmitting power: 600mW

Full video format: NTSC / PAL
Input voltage: 7V – 24V

Transmission distance: more than 0.5km ( 25mW ), more than 1km ( 200mW ), more than 2km ( 600mW )

With output power self-check function
Antenna connector: MMCX

5042 3 Blade Propeller

Material: PC
Mounting hole: 5mm
Center thickness: 8mm
Quantity: 2 pairs
Weight: 7.25G a pair   
Color: blue, red, yellow, purple, white MIX
Delivery color randomly 


Note: Battery is Not Included.


Package included:
1x STX225 DIY version FPV racing drone PNP

SKU: 1437279 Category:

Based on 0 reviews

0.0 overall
0
0
0
0
0

Be the first to review “SKYSTARS STX225 DIY Version 225mm RC FPV Racing Drone PNP w/ F405 AIO RGB LED 1200TVL 600mW VTX”

There are no reviews yet.