-10%
Multi Rotor Parts
SpeedyBee F7 V2 Flight Controller Flash Firmware Wirelessly Blackbox 30.5×30.5mm for RC Drone FPV Racing
- SKU : 25788
- Condition : New
- Brand : SpeedyBee
- Return Policy : 30-day refund or replacement
$86.99 $96.99
Description:
Brand: SpeedyBee
Item Name: SpeedyBee F7 V2 Flight Controller
| MCU | STM32F722 |
| IMU | MPU6000 |
| USB | Type-C |
| Baro | BMP280 (I2C) |
| OSD | BetaFlight OSD w/ AT7456E chip |
| BLE | Support, used for Flight Controller configuration |
| WiFi | Support, used for data transfer, e.g firmware flashing, and Blackbox analysis. |
| DJI Air Unit slot | A full DJI Air Unit JST slot onboard |
| BlackBox | 16MB onboard dataflash |
| Current Sensor | 1 : 10 (Scale 168) |
| BetaFlight Camera Control Pad | Yes |
| Power input | 3S – 6S Lipo |
| 5V power output | 7 * 5V output, 6 pads and a BZ+ pad used for Buzzer, the maximum load current is 2.5A. 9V * 1, the maximum load current is 2.5A. |
| 9V power output | 2 * 9V output, 1 pads and another one used for DJI slot |
| 4.5V power output | 1 * 4.5V output pad |
| 3.3V power output | 1 * 3.3V output pad, the maximum load current is 500mA. |
| ESC signal | M1 – M4 |
| UART | Full UART * 5(UART1, UART2, UART3, UART5, UART6) |
| ESC Telemetry UART | UART4 RX |
| I2C | Used for external Magnetometer, Sonar, etc. |
| LED | pinUsed for WS2812 LED |
| Buzzer | BZ+ and BZ- pad used for 5V Buzzer |
| Boot button | Used to easy enter DFU mode |
| RSSI input | RSSI input solder pad |
| SmartPort | Use any TX pad of UART for the SmartPort feature. |
| Support Flight Controller Firmware | BetaFlight(Default), EMUFlight |
| Target name | SPEEDYBEEF7V2 |
| Mounting | 30.5 x 30.5mm, 4mm hole size |
| Dimension | 41 x 38 x 6.9mm |
| Weight | 9g |
Package Included:
1 x SpeedyBee F7 V2 FC
1 x JST 8PIN Cable(30mm)
1 x DJI 6PIN Cable(80mm)
5 x M3*8mm Anti-vibration Silicone Grommets
There are no reviews yet.