Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Description:
Motor Parameters:
Product Name: 57 two-phase stepper motor
Material:Metal
Color:Black
Prodcut Size:Lenth is 57mm,diameter is 55mm
Product Weight:674.9g
Packaging Size:150*90*90mm
Packaging Weight:About 761g
Step Angle: 1.8 ┬░
Driving Voltage: 24V
Rated Current: 3A
Rotor Inertia: 300g.cm┬▓
Max Speed: 1000rpm (recommended load 600rpm)
Static Moment: 1.2N.m
Phase Inductance: 2.5mH
Phase Resistance: 0.9╬®
Wiring Instructions:
1. VCC : Connect 12-30V power supply ( Refer to the working voltage of the motor, general 24V )
2. GND: Ground wire
3. CLK : Control signal (Connected to pulse input )
4. DIR: Direction control signal ( Floating forward, ground reverse )
5. ENA: Connect to enable signal ( Default enable, grounding stops working )
6. P2: Connect one phase to the motor on each side ( Refer to the motor parameter description, the motor is divided into two phases AB, pins 1 and 2 are connected to one phase, and pins 3 and 4 are connected to the other phase. )
DIP switch {ON (1) / OFF (0)}:
1.Div1, Div2 control pulse frequency division
(1) 00: 4 subdivision
(2) 10: 8 subdivision
(3) 01:16 subdivision
(4) 11:32 subdivision
2.Ctl setting control mode, open-loop / closed-loop
(1) 0 : Open-loop mode
(2) 1 : Closed-loop mode
3.AC setting calibration
Turn the AC to position 1, and turn on the power. The LED blinks 3 times to start automatic calibration. The motor shaft rotates counterclockwise for one cycle and then clockwise for one cycle. The system automatic calibration complete and the LED continues to flash. The AC dial returns to position 0, and then restart power.
Application examples:
1.3D printing with fine closed-loop positioning
2.Optical aiming (Laser, telescope, camera gimbal, etc.)
3.Speed loop record player
4.Force feedback / impedance control robot
5.Force feedback of game controller
6.Adjustable mechanical impedance: virtual spring, damper, etc.
7. Electric transmission device between two axes such as CNC machine tools
8.Gravity elimination (eg: offset gravity torque on the robot arm, etc.)
9. Load detection and feature description (Used as a balance, etc.)
10. Paper towel / TP distributor
11.Variable load (Brake, generator, etc.)
12.Valve control (Automated garden hose, etc.)
Package included :
1X Motor Drive Board
1X Motor
1X Motor Line
1X Dedicated Radial magnet
1X Dedicated Screw Bag
1X Instruction Manual
There are no reviews yet.