30.5×30.5mm Upgrade HIFIONRC F722 Pro V2 F7 OSD Bluetooth Flight Controller w/ 5V 10V BEC & 60A BLheli_32 3-6S 4in1 Brushless ESC Stack for DJI Air Unit / Caddx RC Drone FPV Racing

1. ÔÇèIMU: MPU6000 only. 

2. Also has DJI HD OSD. ( Only betaflight osd old version)

3. 10V 2.5A BEC Output ( 9V 3A old version)

4. 40x40mm External Dimension (30.5×30.5mm old version)

5. Designed the LED installation position in the four corners

6. has wireless Bluetooth parameter modulation

7. Type-C connection port

8. More clean and beautiful borad design & Reduce interference

July 28th, 2020

ÔÇèBrand Name: HIFIONRC

ÔÇèItem Name: 30.5×30.5mm F7 OSD Flight Controller & 60A 4in1 ESC Stack

ÔÇèMCU: STM32F722RGT6 216MHz

ÔÇèOSD: Betaflight SPI OSD &  DJI HD OSD (UART6)

ÔÇèUART: UART 1/2/3/4/5/6 

ÔÇèBEC Output: 5V 3A & 10V 2.5A ( supports stable power supply for DJI HD and high-power analog graph transmission)

ÔÇèInput Voltage: 3-6S Lipo

ÔÇèBlackbox: 16MB

ÔÇèFirmware: HIFIONRC F7

ÔÇèLED: 4 Ways independent LED Pad, support WS2812 Programable LED

ÔÇèDimension: 40x40mm

ÔÇèMounting Hole: 30.5×30.5mm, M4

ÔÇèWeight: 7g

ÔÇè- Onboard Voltage Sensor

ÔÇè- Support SBUS, CRSF, IBUS, Spektrum 1024/2048, XBUS, SumD & SumH Receiver, Built-in inverter

ÔÇè- Support Support 3.3V Satellite Receiver ; PPM Receiver

ÔÇèInput Voltage: 3-6S Lipo

ÔÇèCon. Current: 60A

ÔÇèBurst Current: 65A (5S)

MCU: STM32F051, 48MHz

ÔÇèFirmware: BLheli_32

ÔÇè-Onboard Current Sensor

ÔÇè- Support DShot300-1200, Proshot1000, Oneshot, Multishot, PWM

ÔÇèÔÇèMounting Hole: 30.5×30.5mm, M4 

ÔÇèWeight: 12g 

– has wireless Bluetooth parameter modulation, and the UART used for bluetooth parameter modulation is UART4_MSP´╝î

  The Bluetooth signal is isolated and does not interfere with the receiver and the rest of the equipment

 (If we don’t find the bluetooth antenna, don’t worry, we hid it)

– This FC includes a DJI HD cable in default.

   If you use DJI HD, this means you don’t need to buy a separate FC and DJI HD cable.

   Don’t worry if you’re using a traditional Video TX. 

– The flight controller comes with an AT7456 chip, allowing you to still use OSD functionality.

– The STM32F722 MCU has a built-in inverter, so the receiver can be installed in any RX.

   Used when opening the corresponding UART serial digital receiver (default is RX2_UART2).

Click here buy separate replace F722 Pro F7 Flight Controller Board.

Click here buy separate replace 60A BLheli_32 4In1 ESC

ÔÇè

ÔÇè1x F722Pro V2 F7 Flight Controller

ÔÇè1x 60A BL_32 4in1 ESC

1x Capacitor

ÔÇè1x Connection Cable

1x Power Cable

ÔÇè1x bag of Screws