BETAFPV Beta65S Lite Micro FPV 1/4 CMOS Sensor 1200TV Camera Built-in Protocol Native Receiver Brushed Whoop RC Drone Quadcopter”

BETAFPV Beta65S Lite Micro FPV 1/4′ CMOS Sensor 1200TV Camera Built-in Protocol Native Receiver Brushed Whoop RC Drone Quadcopter

Description:

Item	Specification
Beta65S Drone	Wheelbase	65mm
	Weight	25g (without battery)
	Motor	7x16mm 19000KV Brushed Motors
	Canopy	Canopy for Camera
	Flight time	3-4 minutes
	FC Board	BETAFPV Lite Brushed FC V3
	Built-in Rx	Frsky D8 protocol
	Camera	C02 Camera
	Battery Connector	BT2.0
	USB Port	USB Type-C
	Propellers	Gemfan 31mm 4-blades
Camera	Image Sensor	1/4′ CMOS Sensor
	Horizontal	1200TVL with Global WDR
	Signal System	NTSC
	Lens	2.1mm(M8) FOV 160°
	S/N Ratio	>50db
	Electronic Shutter Speed	Auto
	Auto Gain Control (AGC)	Auto
	Min. Illumination	[email protected]
	D-WDR	Auto
	Power	DC 3-5.5V
	Current	110mA@5V / [email protected]
	Housing Material	ABS
	Dimension	3*11mm
	Net weight	1.4g
Brushed Flight Controller V3	CPU	MM32F103KBU6
	Six-Axis	MPU6000
	ESC	All FETs are rated at 6.3A maximum
		Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors
	Size	26mm x 26mm(fully compatible with the Inductrix quad frame and mounting pattern)
	Firmware version	LiteSilver V3 firmware
	Receiver	Built-in SPI Frsky with D8 protocol
	Power Cable	55mm, with BT2.0 connector
	Port	External USB Type-C
	Weight	3.2g
Brushed Motors	Size	7x16mm
	Width	7mm
	Height	16mm
	Cable length	50mm
	Shaft Diameter	0.8mm
	Weight	2.95g per motor(including cables and connector)
	Speed	19000KV
	Voltage	3.7V
	Connector	JST 1.25mm 2P connector
Micro Canopy	Material	PP
	Tilt	30° (Unadjustable)
	Weight	1.31g/pc

Features:

– As same as the Beta65S, more punch on throttle with faster 19000KV 7x16mm motors and 4-blade propellers.

– Support level mode and acros mode. Also, it has the ability to change settings for custom builds or to adapt to personal preferences by stick gestures.

– Built-in protocol native receiver, compatible with almost radio transmitter.

Package Included:

1 x Beta65S Lite Micro FPV Quad

2 x 300mAh 1S Lipo Battery

1 x Canopy

1 x Screwdriver

1 x Carry-on bag